St. James Feed Mill Construction - Tower Cam


2022 CFS St. James Feed Mill Construction -6-28-2022
The new feed mill in St. James. Below are some highlights:
  • 450 yds of concrete poured 4.19.2022
  • The concrete pad will be 42 inches thick
  • 40,000 lbs. of rebar in the cement pad
  • The crew started at 4 AM and will finish later today
  • The cement top will cure in 24 hours and the center will cure in 2 weeks
  • Next steps: stem walls and moving dirt for grinding towers

Sinclair Court Makes Great Progress! - New Road into CFS New Mill 



The City of St. James Breaks Ground on Sinclair Court 
 
(St. James, Minn.) On Monday, November 1, 2021, city officials and members of CFS celebrated the commencement of the Sinclair Court project with a groundbreaking ceremony. 
 
This gathering signified the installation of the new city street named, Sinclair Court. At the request of CFS, in honor of Vaughn Sinclair, General Manager of Watonwan Farm Service Co. He was a resident of St. James who began his cooperative career in 1953. Sinclair's 38 years of dedication and hard work converted WFS from a small struggling cooperative into one of the most successful farm cooperatives in Minnesota.
 
The city has designated this as a non-through city street to secure grant dollars from DEED. “We have successfully obtained a grant through MN DEED, and it will fund the majority of the city infrastructure to make this project finally possible.” Said Andrea Lynn, EDA Director for the City of St. James.
 
“This project has been in process for over ten years, and we are grateful to CFS for the finalization, confidence, and investment in our community.” Lynn continued. “Together, we are retaining multiple jobs, and within the ten-year plan, there will be the possibility of  additional job opportunities. It is a significant improvement to the workforce, our tax base, and to the confidence of St. James to make investments.”, finished Lynn. It provides a big opportunity not only for CFS but also for St. James as a whole.
 
Although St. James has a feed mill already with CFS, it is 45 years old and needs replacement. The new mill in St. James will have a milling capacity of 350,000 tons and the opportunity for expansion to 550,000 tons. "The construction of this new mill will provide new opportunities, maintain our current business and standards, increase the value of our members' grain production, and allow us to continue to provide our members with the highest quality products and services", states Merlyn Kruger, CFS CEO. 
 
CFS plans to break ground on the new St. James replacement feed mill in the Spring of 2022.
 

September 3, 2021
 

We are excited to announce that we have received unanimous approval from the CFS Board of Directors to move forward with the construction of a 350,000-ton feed mill in St. James, MN.

The construction of this mill will begin in fall 2021 with completion in 2023.

The decision to move forward with this project has not been taken lightly. The current St. James facility has served us well for 40+ years, but frankly, it has run its course. So, the importance of this replacement mill is vital to our feed business.

During the planning process, we enlisted the Land O' Lakes Strategic Asset Management team to take an extensive look into the new business potential, the financial impact on CFS and the feed business, and grain data and distribution. We wanted to ensure our approach was founded on more than the facility needs alone. Their research determined it was favorable for us to move forward.

We are working closely with the City of St. James. They are excited about the opportunity to have CFS grow within their community.

Our approach will be to move forward with a new feed mill in St. James that will have a milling capacity of 350,000 tons and the opportunity for expansion to 550,000 tons. The construction of this new mill will provide new opportunities, maintain our current business and standards, increase the value of our members' grain production, and allow us to continue to provide our members with the highest quality products and services.

We will continue to provide feed mill updates on our website at https://www.cfscoop.com/feed/new-mill-update. If you have additional questions, please reach out to Merlyn Kruger or Glenn Eben.

 

Sincerely,

Merlyn Kruger, CEO
mkruger@cfscoop.com
507-776-1272 
                                     
Glenn Eben, VP of Feed
geben@cfscoop.com
712-330-4578